1.Specifications  
1-1 Pressure=Max.  7250 Psi / 500 Bar 
1-2 Temperature=Max. 100 ℃ 
  
  
2-1.Extraction Vessel= 1L  X1set 
2-1-1 Pressure=Max.  7250 Psi / 500 Bar 
2-1-2 Temperature=Max. 100 ℃
2-1-3 Volume=600mlX1 (inner basket)
2-1-4 Material=Stainless steel.
2-1-5 Heating system=electric heating
  
2-2.Collection system=1 set 
2-2-1 CO2 flow rate control valve X 1set
2-2-2 Control valve heating module X 1set
2-2-3 Design for Collecting in atmospheric 
  
2-3 Pressure control system= PM-10000C X 1set 
  
2-4 Cooling system= 1 set 
  
3.Material of tanks, piping and valves.  
3-1 Piping:SUS 304
3-2 Structure: Aluminum

4.Control  system and monitor  
4-1 Control valve=manual type/ high pressure valve
4-2 Temperature control= Temperature controller with thermal couple
4-3 Pressure control=Pressure gauge/Pressure Transducer
4-4 CO2 flow control：flow meter / display the gas CO2 flow rate

5.Safety and Protection  
5-1 Rupture dick= set pressure  8500 Psig)
5-2 Heating area with isolation jacket

6.Utility requirement (Supplied by buyer)  
6-1 Power require= 220 V, 12 A
6-2 Compressed air: 7Kgf/cm2; 4 M3/min.
6-3 CO2 supply=Liquid CO2 cylinder with inner tube

7.Option( not standard )  
7-1 Spare parts=(ex: seal/rupture dick,…….)
7-2 Co-Solvent pump module

------------------------------------------------------------------------------------------------------------------

Digital Pressure Control Module (PM-10000C)

Applied Fluid: Liquid carbon dioxide (LCO2)

Specifications
1. System output pressure: 1000~10000 psi
    (depending on driving pressure)
2. System output flow rate: 200ml/min (up to 4350 psi)
3. Booster pump
4. Built-in pre-cooler (without chiller)
5. Piping: seamless stainless steel tube
6. Certification: Whole system pass CE, 
    EN 61010-2-010(2nd Ed) for use with EN 61010-1:2001 Standard
7. Dimensions: 360 mm × 600 mm × 270 mm
8. Weight: 30 kg

Control System
1. Color Touch-Panel for Pressure Control Systems and human-machine operation interface 
2. Programmable pressure control system
3. Proportional precise pressure control
4. Multi-step for booster and immediately adjust / response control
5. Alarm (notice) for abnormal operation and operation timer

Safety Protection
1. Overpressure abnormal alarm devices
2. Emergency stop devices and automatic gas cut-off installations for overpressure
3. Safety relief valve for overpressure (full flow rate)

Utility Needs
1. Power supply: 110/220V
2. Source air: (5~8 kg/c㎡)
3. Chilly: water temperature≤5℃